Your control is simply wired at the touch of a button with the MFD-Titan. Naturally, all the function blocks of the easy800 control relay are at your disposal. This includes PID-controllers with all the additional function blocks.
Up to eight stations can communicate with one another using the integral easy-NET network. Each easy-NET station can run its own programs. Thus, decentralized, intelligent and fast to install control systems are possible. Naturally, an MFD-Titan device can communicate with seven other devices on the network.
A circuit diagram is wired using ladder logic. The circuit-diagram is entered directly in the MFD-Titan display.
You can:
Wire
make and break contacts in series and parallel
Switch output
relays and auxiliary relays
Define outputs as
coils, remote-control switches, positive/negative edge detection or
as a relay with a self-holding contact
Select timer
relays with differing functions:
Use
up/down counters
Count fast
signals:
Compare values
Copy and compare
ranges of values
Display text with
variables, enter setpoint values
Process
inputs/outputs (DC devices)
Use 7-day and
52-week counters
Count operation
hours (run time counter)
Communicate via
the integral easy-NET network
Control with P, PI
and PID controllers
Scale arithmetic
values
Output manipulated
values as pulse-width modulated signals
Limit values
Implement
arithmetical functions:
Trace
the flow of current in a circuit
Load a
circuit-diagram, save it and assign a password.
